ARO PortaMount™ | Magnetic Silicone Portafilter Mount (Black, 54mm)

Installation Instructions Every PortaMount comes with three different ways to mount it, so you can set it up exactly where you need it. You can use the built-in rare earth magnets for a quick and clean install on any steel surface, or attach the included mounting plate with either 3M Command Strips for a no-drill solution, or screws and anchors for a permanent, heavy-duty setup. The PortaMount snaps securely into the plate with a simple snap-in connection, and can be removed just as easily for cleaning or relocation. Below are step-by-step instructions for each mounting method: High-Strength Magnets: The simplest, most effortless option. Works directly on espresso machines (if they attract magnets) or any other magnetic steel surface. No prep required. Just place the PortaMount where you want it and the built-in magnets do the work. The silicone backing grips the surface to prevent sliding, even with heavy portafilters. 3M Command Strips + Mounting Plate: Perfect for walls, cabinets, or backsplashes where you want a clean, no-drill solution. 1. Clean the mounting surface and the back of the mounting plate. Use the included alcohol wipe if necessary. Make sure both are free of dust and oils. 2. Stick two Command Strips to the back of the plate ensuring the release tab is facing the bottom of the mount. 3. Firmly press the plate to your desired location to adhere it to your mounting surface. 4. Align the tabs on the mounting plate with the slots in the PortaMount and press until it snaps flush into place. The mounting plate hides the ends of the Command Strips for a seamless look. If you ever want to move it, remove the PortaMount from the plate and pull the tabs of the strips straight down. They’ll release cleanly without damaging your surface. Screws & Anchors + Mounting Plate: The strongest, most permanent option. Ideal for drywall. 1. Hold the mounting plate against the wall and mark the two screw hole locations. 2. Drill holes in the wall with a 3/16 in (4.8 mm) bit. 3. Insert the included #6 plastic wall anchors into the holes in the wall. 4. Align the mounting plate with the anchors and secure it using the screws and a Phillips screwdriver. 5. Align the tabs on the mounting plate with the slots in the PortaMount and press until it snaps flush into place. If you have any questions about installation, or run into any trouble, please reach out. We’re always happy to help. Compatibility The ARO PortaMount is designed to fit two of the most common portafilter styles used in both home and professional espresso setups: 58mm Straight-Tab Portafilters: Compatible with machines from brands with E61 groupheads like ECM, Profitec, Breville, La Marzocco, Slayer, Rocket, Synesso, Bezzera, Lelit, Rancilio, and many more. It will also work with angled-ear 58mm portafilters (for example, compatibility with Gaggia). However, for these styles, you must install the PortaMount at an angle so the portafilter handle hangs straight down when mounted. 54mm Three-Tab Portafilters: Compatible with Breville and Sage machines, including the Barista Express, Barista Express Impress, Barista Pro, Barista Touch, Barista Touch Impress, Bambino, Bambino Plus, Infuser, and Duo-Temp Pro. Care and Maintenance For daily maintenance, wipe clean with a cloth or rinse the silicone PortaMount under water. For a more thorough clean, hand wash with mild soap and dry immediately. Not dishwasher safe.

• The ARO PortaMount keeps your coffee station organized by holding your portafilter where you want it. With three mounting options to choose from, it is designed to work across a range of setups. Built-in rare earth magnets attach directly to steel surfaces, while the included mounting plate can be installed with adhesive strips or screws on walls, cabinets, or backsplashes.
• Compatible with 54mm Portafilters: Designed to fit standard 54mm three-tab Breville/Sage portafilters. The PortaMount gives your portafilter a secure place to rest, keeping it off the counter and within easy reach for a cleaner, more organized coffee station.
• Versatile Mounting Options: Three rare earth magnets sealed inside the PortaMount attach directly to steel surfaces. The included mounting plate can also be installed with 3M Command Strips or screws and anchors for walls, cabinets, or backsplashes.
• Durable Silicone Construction: Made from heavy-duty matte black silicone, the PortaMount is built for daily use in home or café setups. The material resists splashes and wear, while the soft contact surface helps protect both your portafilter and the mounting area.
• Easy to Remove for Cleaning: Whether attached directly to a steel surface with its built-in magnets or used with the included mounting plate, the PortaMount removes in seconds for easy wiping, rinsing, and reinstalling.