Hand Crank Twist Meter Twisting Machine Yarn Twist Measurement for Cotton/Wool/Linen/Silk

Introduction:<br> This instrument is used to determine the number of twists of cotton, wool, linen, silk and other yarns within a certain length, in order to assess product quality and correct the problems in the production process.<br><br> Product Parameters<br> Range of test length: 0-11.8"(0-300mm)<br> Minimum twist indication: 1/10 twist<br> Maximum twist indication: 500 twists<br> Right yarn camp steering: It can be rotated forward and reversed<br> Transmission mode: Hand crank drive<br> Tension weight: Tension hammer: 5CN, 10CN<br> Weight hammer: 10CN, 20CN<br> Magnification: 10 times<br> Package size: 26"*7.1"*7.1" (66cm*18cm*18cm)<br> Net weight/Gross weight: 9.6lbs(4.35kg)/10.8lbs(4.9kg)<br><br> Item Included(056563)<br> Twisting Machine *1<br> Magnifying glass *1<br> Teasing Needle *1

• 【Worm Wheel】The design of the worm wheel ensures accuracy during testing. The test length is 0~300mm, and the measuring range is 1/10~500 twist, which can meet the high precision measurement needs.
• 【Scale】Adopting stainless steel scale, the maximum range is 300mm. Through the scale, you can accurately measure the number of twists of the yarn in a specific length, and then assess the quality of the yarn.
• 【Yarn Twist Counting Disc】The needle on the counting disk will move with the decrease of twist during the yarn untwisting process, and finally stop at a certain position, the value corresponding to this position is the twist value of the yarn.
• 【Yarn Clamping Device】The wheel on the left side guides and holds the yarn in place as it moves. The one on the right is used to clamp the yarn to ensure that it remains stable during the testing process, avoiding the yarn from loosening or falling off during rotation, which would affect the accuracy of the test results.
• 【Supporting Leg】Four rubber supporting legs at the bottom, which are non-slip, wear-resistant, good silence, can ensure the stability of the machine, and can prevent water from entering the machine from the bottom.